Ubuntu Version
Ubuntu 26.04 LTS
Desktop Environment (if applicable)
GNOME
Problem Description
Hi, I face an abnormal battery drain during suspend (s2idle), about 5W 3W (which is 5% battery in one hour).
There is no deep sleep (s3) available on the laptop.
I am pretty sure that some component on the PCI bus is still active whereas it should not during s2idle. But I did not manage to be sure of which one, nor to avoid it. Options are the SSD, the WiFi card or sensors. If the SSD is involved I am not even sure if it is a controller problem or a kernel/OS one.
Thank you for any help ![]()
Relevant System Information
Here is the output of ĂŹnxi -b`:
System:
Host: ahonorat-Latitude-7430 Kernel: 7.0.0-38-generic arch: x86_64 bits: 64
Desktop: GNOME v: 50.1 Distro: Ubuntu 26.04.1 LTS (Resolute Raccoon)
Machine:
Type: Laptop System: Dell product: Latitude 7430 v: N/A
serial:
Mobo: Dell model: 0NMM73 v: A02 serial:
Firmware: UEFI vendor: Dell v: 1.42.0 date: 07/23/2026
Battery:
ID-1: BAT0 charge: 32.5 Wh (67.1%) condition: 48.4/58 Wh (83.4%)
volts: 15.25 min: 15.2
CPU:
Info: 10-core (2-mt/8-st) 12th Gen Intel Core i7-1265U [MST AMCP]
speed (MHz): avg: 400 min/max: 400/1800:1300
Graphics:
Device-1: Intel Alder Lake-UP3 GT2 [Iris Xe Graphics] driver: xe v: kernel
Device-2: Microdia Integrated_Webcam_FHD driver: uvcvideo type: USB
Display: wayland server: X.Org v: 24.1.10 with: Xwayland v: 24.1.10
compositor: gnome-shell driver: dri: iris gpu: xe resolution: 3072x1728~60Hz
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 26.0.8-1ubuntu0.3
renderer: Mesa Intel Iris Xe Graphics (ADL GT2)
Info: Tools: api: eglinfo,glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi
Drives:
Local Storage: total: 465.76 GiB used: 18.35 GiB (3.9%)
Info:
Memory: total: 32 GiB note: est. available: 30.03 GiB used: 2.87 GiB (9.6%)
Processes: 394 Uptime: 43m Shell: Bash inxi: 3.3.40
Here is the current Kernel configuration:
GRUB_CMDLINE_LINUX_DEFAULT=âiwlwifi.power_save=1 xe.force_probe=46a8 module_blacklist=i915 intel_pstate=passive quiet splashâ
Error Messages / Logs
Error message got after modifying the Intel s0ix self test tool:
Checking PCI Devices D3 States:
[ 48.184056] snd_hda_intel 0000:00:1f.3: PCI PM: Suspend power state: D3hot
[ 48.184121] i915 0000:00:02.0: PCI PM: Suspend power state: D3hot
[ 48.187237] xhci_hcd 0000:00:0d.0: PCI PM: Suspend power state: D3cold
[ 48.200795] intel_ish_ipc 0000:00:12.0: PCI PM: Suspend power state: D0
[ 48.200802] intel_ish_ipc 0000:00:12.0: PCI PM: Skipped
[ 48.200950] i801_smbus 0000:00:1f.4: PCI PM: Suspend power state: D0
[ 48.200959] i801_smbus 0000:00:1f.4: PCI PM: Skipped
[ 48.213421] nvme 0000:01:00.0: PCI PM: Suspend power state: D3hot
[ 48.213830] pcieport 0000:00:06.0: PCI PM: Suspend power state: D0
[ 48.213849] pcieport 0000:00:06.0: PCI PM: Skipped
[ 48.215666] mei_me 0000:00:16.0: PCI PM: Suspend power state: D3hot
[ 48.216911] proc_thermal_pci 0000:00:04.0: PCI PM: Suspend power state: D3hot
[ 48.217893] intel-lpss 0000:00:15.1: PCI PM: Suspend power state: D3hot
[ 48.219578] xhci_hcd 0000:00:14.0: PCI PM: Suspend power state: D3hot
[ 48.219682] iwlwifi 0000:00:14.3: PCI PM: Suspend power state: D3hot
[ 48.223407] thunderbolt 0000:00:0d.2: PCI PM: Suspend power state: D3cold
Checking PCI Devices tree diagram:
-[0000:00]-±00.0 Intel Corporation Alder Lake-U15 Host and DRAM Controller
±02.0 Intel Corporation Alder Lake-UP3 GT2 [Iris Xe Graphics]
±04.0 Intel Corporation Alder Lake Innovation Platform Framework Processor Participant
±06.0-[01]----00.0 KIOXIA Corporation NVMe SSD
±07.0-[02-39]â
±07.1-[3a-71]â
±08.0 Intel Corporation 12th Gen Core Processor Gaussian & Neural Accelerator
±0d.0 Intel Corporation Alder Lake-P Thunderbolt 4 USB Controller
±0d.2 Intel Corporation Alder Lake-P Thunderbolt 4 NHI #0
±12.0 Intel Corporation Alder Lake-P Integrated Sensor Hub
±14.0 Intel Corporation Alder Lake PCH USB 3.2 xHCI Host Controller
±14.2 Intel Corporation Alder Lake PCH Shared SRAM
±14.3 Intel Corporation Alder Lake-P PCH CNVi WiFi
±15.0 Intel Corporation Alder Lake PCH Serial IO I2C Controller #0
±15.1 Intel Corporation Alder Lake PCH Serial IO I2C Controller #1
±16.0 Intel Corporation Alder Lake PCH HECI Controller
±1f.0 Intel Corporation Alder Lake PCH eSPI Controller
±1f.3 Intel Corporation Alder Lake PCH-P High Definition Audio Controller
±1f.4 Intel Corporation Alder Lake PCH-P SMBus Host Controller
-1f.5 Intel Corporation Alder Lake-P PCH SPI Controller
The pcieport 0000:00:06.0 ASPM enable status:
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
Pcieport is not in D3coldïŒ
0000:00:06.0
lspci excerpt of the devices not reachning D3cold:
00:12.0 Serial controller: Intel Corporation Alder Lake-P Integrated Sensor Hub (rev 01) (prog-if 00 [8250])
Subsystem: Dell Alder Lake-P Integrated Sensor Hub
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
IOMMU group: 8
Region 0: Memory at 6053170000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vendor Specific Information: Len=14 <?>
Kernel driver in use: intel_ish_ipc
Kernel modules: intel_ish_ipc
00:1f.4 SMBus: Intel Corporation Alder Lake PCH-P SMBus Host Controller (rev 01)
Subsystem: Dell Alder Lake PCH-P SMBus Host Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 13
Region 0: Memory at 605319c000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 Non-Volatile memory controller: KIOXIA Corporation NVMe SSD (rev 01) (prog-if 02 [NVM Express])
Subsystem: KIOXIA Corporation NVMe SSD
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 14
Region 0: Memory at 9de00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x4
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 10BitTagReq- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [d0] MSI-X: Enable+ Count=9 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [e0] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [f8] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Latency Tolerance Reporting
Max snoop latency: 15728640ns
Max no snoop latency: 15728640ns
Capabilities: [110 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=10us PortTPowerOnTime=60us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=0us LTR1.2_Threshold=616448ns
L1SubCtl2: T_PwrOn=500us
Capabilities: [128 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [200 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 04000001 0000000f 01070000 c0c62330
Capabilities: [300 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Kernel driver in use: nvme
Kernel modules: nvme
What Iâve Tried
- I ran the official Intel s0ix self test tool and it says everything is fine, except when modifying the script to force assesment of PCI devices and not only rely on the residency level/duration.
- I have installed Powertop and set all its settings to GOOD.
- I have tried various kernel parameters, including nvme_core.default_ps_max_latency_us=0, including xe or i915, including intel specific parameters.
- I reached Dellâs engineers but since there is no battery drain with Windows (modern standby) they stopped to help (although the laptop is Ubuntu certified)
- I modified the BIOS dynamic tables (DSDT) to enforce deep sleep mode, but this caused other bugs after resuming from suspend
Well now I am bit stucked, and wondering if it is a bug from Dellâs BIOS, Intel components or the kernel.